Moving camera is Photographer enemy

One of the biggest enemy is the photographer moved the camera when shooting are doing. Many images that should be good because the camera is broken swing. And this is difficult to regenerate even though we use photo editor program.

Various things can cause this is the case, as the lens that is too long and heavy, the grip is less robust, or our inability to prevent the camera holding sway for some time.

Generally, this occurs at a slow speed SHUTTER in order to get more light, thus causing the camera to vibrate. Goyangnya although only slightly, this is enough to make us into the photo as if consisting of 2 or more images of the pile (ghost image). While on the shooting with a high SHUTTER, the possibility of this happening is very small.

There are significant differences between the images that do not focus (blur) or shake (shake), although very often people mix adukkan both.












Zoom = Likelihood of a larger shake

One principle that is very important, is the more we will zoom the object, the more likely the camera is rock. Therefore to get the results by using sharp zoom SHUTTER required speed is higher than we do when shooting with the wide lens (wide angle lens).

Solution to this is use the SHUTTER speed faster. There is a theory which is often used by the photographer, namely the theory of "one over the focal length". Simpelnya use of this theory is we need to know the type of lens and focal length that we used when shooting. Then take SHUTTER speed 'over / under' is focal length. SHUTTER digit number that is secure so that we can prevent the occurrence of shaking on the camera we.

For example, we use a lens with a 55-200 mm focal length as far as 200 mm, the minimum we are SHUTTER 1 / 250 so we are not shaking the camera. This is a general number that can be used by the photographer who hands vibrate more easily.

Meanwhile, a photographer for the stronger hand in holding the camera (Steady hands), the minimum speed for SHUTTER 200 mm focal length is 1 / 125.

When we use the SHUTTER speed below the figures above, the possibility of a shaking in the camera will be larger. For example, using 200 mm focal length with the SHUTTER 1 / 60.

However this is not a fixed price. This is a simple guide that is widely used by the photographer based on their experience to do the shooting.

There are 2 alternatives which can be used to overcome this shaking, that is to use a tripod / monopod or use flash. However the use of flash is limited in the near distance, and can also remove the natural color effects arising from the object.

Some of the lenses at this time that many have added features subtrahend shake, such as the output lens with Nikon Vibration Reduction (VR), the Canon Image stabilizer (IS), Steady shot with Sony and others. In Nikon / Canon, (VR / IS) is how it works with the motion detector (gyro), which later menggerakan one element / group lens to counteract the movement. So in the case of shooting the photographer to move down, then the element / lens group to the top of its digerakan by this feature.

In the Sony / Olympus, (SteadyShot / SWD) also use a motion detector, but the component that is driven to counteract the movement is Sensornya Image.

All ways to counteract the movement over the same purpose, namely to make photografernya can take photos up to 2 ~ 3 stops lower speed vibration because I usually look at the low speed system is dinetralkan VR / IS / OS is.

Hopefully these tips useful. Congratulations for taking plane picture!

Tidak ada komentar:

Posting Komentar